• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



No spark

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chiru

Registered Users
*
Joined
Oct 21, 2008
Messages
293
Reaction score
210
Location
Geneva
Hello,
I have a slick mag (right) and an e-mag (left). I tested the ignition as pre-start check. The e-mag works well but on the plugs from the slick mag, no sparks.
I have checked the switch, all ok but no change. I removed the wire to the p-lead and ground and still no sparks. The engine is correctly grounded.
I am worried to have over torqued and damaged the condenser but the washer doesn’t seem to have moved.
How can I check the condenser ?

Do you have other ideas ?
Thank you
 

Latest posts

Back
Top