• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



O-rings for Christen Inverted Oil System

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CKeller

Premium Member
Joined
Aug 18, 2006
Messages
268
Reaction score
25


Today IcalledAviat to orderO-rings for overhauling my Christen Inverted Oil System.



Aviat uses its own part numbers for these items. I'm wondering if anyone out there has matched them to a standard MS part number so I can just buy themfrom Aircraft Spruce, or find thematthe Aircraft Section of my local Napa store?






Specifically, I'm talking about


1. Christen 804-A swiveling sump fitting, 2 O-rings required, P/N 65918
2. Christen 805 sump plug (inserted in the sump ahead of the pickup screen): 1 O-ring, P/N 65921
3. Christen 802 oil valve, 2-O-rings required, P/N 63909.


Thanks~
Colleen
 

Latest posts

Back
Top