• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Painting A Hatz Classic with Stewarts System Paint

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ebby

Member
Joined
Dec 28, 2013
Messages
8
Reaction score
0
I'm ready to paint and would like some advice on how much EkoPoly paint to buy. At $300 a gallon I don't want to end up with too much or run short. So if any members have painted a biplane using this system please let me know. Im doing EkoFil and primer in the next two weeks and would like to get an order out soon for the topcoats. Ive attachéd a JPG of the paint scheme. I figure one qt of red for the nose bowl should work. The other two colors are blue and light gray. I will use a vinyl graphic for the Griffin. The leading edge will not be scalloped but a straight line covering the leading edge only on both wings.

Thanks. Your help is greatly appreciated.

HatzClassic_Art Deco_3view_revised.jpg
 

Latest posts

Back
Top