• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Phase III grind camshaft

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flyingbandit

Well-Known Member
Lifetime Supporter
Joined
Feb 22, 2015
Messages
78
Reaction score
25
Can anyone explain how much difference a Phase III ground camshaft makes when using high compression pistons? I know people who have put the 10:1 pistons in their IO-360 without profiling the cam. How much HP would be gained if you did a phase3 grind on the cam?
Thanks
 

Latest posts

Back
Top