I'm gearing up for a Knight Twister build. When Hale Wallace built his N30KT Knight Twister he used Pitts controls and cockpit layout instead of those of the original Knight Twister design. Steen Aero Labs sells blueprints for the Pitts S1-C. They also have a excellent photo essay showing views of the various control components. http://www.steenaero.com/PittsS1/construction_gallery_index.cfm All pretty straight forward. Below is a list of all the drawings in the Pitts S1-C set. I need help as to which ones show all the various control components so I can purchase them from Steen. I want to make sure I get just the ones needed. Can anyone here point me to the drawings I will need?
Thanks Craig
# 1 of 33 Three View
# 2 of 33 Three View Details
# 3 of 33 Basic Fuselage Structure
# 4 of 33 Fuselage Detail - 1st Level
# 4A of 33 Fuselage Detail - 1st Level
# 4B of 33 Fuselage Detail - 1st Level
# 4C of 33 Fuselage Detail - 1st Level
# 5 of 33 Empennage
# 5A of 33 Empennage
# 6 of 33 Fuselage Detail 2nd - Level
# 7 of 33 Landing Gear Weld Assy
# 7A of 33 Landing Gear Spring Gear Conversion
# 8 of 33 Turtle Deck Assy
# 9 of 33 Instrument Panel
# 10 of 33 Firewall Assemblv
# ll of 33 FuselageS tringer
# 12 of 33 Sheet Metal & Cowling
# 12A of 33 Sheet Metal & Cowling
# 13 of 33 Nose Bowl / Wheel Pants
# 14 of 33 Wing Ribs
# 14A of 33 Lower Butt Rib #1
# 14B of 33 U Rib #1-8/l Rib #2-3
# 14c of 33 L Rib #4-8/u & L Ribs 9
# l5 of 33 Wing Spars
# 16 of 33 Lower Wing Assembly
# 17 of 33 Upper Wing Assembly
# 18 of 33 Wing Fittings & I- Struts
# 19 of 33 Pitot Static System
# 20 of 33 Aileron Assy - Lower
# 20A of 33 Aileron Assy - Lower
# 2l of 33 Leading Edge Installation
# 22 of 33 Engine Mount - Dynafocal
# 22A of 33 Engine Mount
# 24 of 33 Fuel System Installation
# 25 of 33 Electrical System
# 26 of 33 Brake System
# 27 of 33 Bngine Installation
# 28 of 33 Oil SystemI nstallation
# 29 of 33 Exhaust System AssY
# 30 of 33 Baffling
# 32 of 33 Canopy
# 33 of 33 Fairings
Edited by: acwelder