• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Pitts fuel tank mass production !

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chrislange

Well-Known Member
Supporting Member
Joined
Feb 23, 2018
Messages
214
Reaction score
461
Location
Germany
Hi Guys,

The last couple days a friend of mine and I tried to build some S1 fuel tanks. It was the first time for us working with sheet metal but luckily we had some great help from an experienced builder. I would say it went quite well. We have 4 fuel tanks that are waiting to be welded.
Here are some pictures :

photo_2023-01-27_11-02-09 (2).jpg
photo_2023-01-27_11-02-10.jpg
photo_2023-01-27_11-02-11.jpg
photo_2023-01-27_11-02-14 (2).jpg
photo_2023-01-27_11-02-16.jpg
photo_2023-01-27_11-02-19 (2).jpg
photo_2023-01-27_11-02-20.jpg
photo_2023-01-27_11-02-22.jpg
photo_2023-01-27_11-02-25.jpg
photo_2023-01-27_11-02-27.jpg
 

Latest posts

Back
Top