• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Pitts S1 standard gear options

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

takair

Well-Known Member
Supporting Member
Joined
Aug 18, 2021
Messages
191
Reaction score
60
Location
Oxford, CT. USA
I know many threads on gear, but I couldn’t find some answers I was looking for. I’m restoring a ‘64, very short S1 with an O290. I’ve made the decision to try to keep it relatively “vintage”, minimal mods from original. That said, I would like to consider any ground handling improvements. Plane currently has Haigh locking tail wheel. Previous owners have reported acceptable handling with the exception of the last low time owner who damaged it on his first take-off attempt.

I’ve talked to Chris about the Wolf/RV gear. I have not dismissed this but it may look odd with the old cowl and airplane lines. It is slightly heavier and more expensive…all considerations….but I have heard it is amongst the best handling mods to the aircraft. I’ve seen the spring (Grove) gear discussions which often end in discussions on cracking of the fuselage. I understand it is also heavier than either Wolf or stock gear. Then there are the threads on the standard bungee gear, including mention of “long gear”.

What is “long gear”? Does it provide for wider wheel base? Given the reports of sporty ground handling, do folks ever “widen” the bungee gear and does it provide for better ground handling? It seems that many of the better handling biplanes have wider stance. So, given that I am trying to minimize major airframe mods and cost, are there options that should be considered with the basic bungee gear?
 

Latest posts

Back
Top