- Joined
- Jun 24, 2012
- Messages
- 118
- Reaction score
- 19
Hello!
I bought a one-off biplane that was setup for a Franklin engine and although I have found one that'll work. I might want to go with a IO-360, the biggest issue is the engine mount of course.
Does anyone have the S2 mount dimensions as it bolts to the firewall? I have made mounts before but if the original builder used a known design it'll definitely save time and money!
I have already checked the dimensions for the Skybolt and Starduster too with no luck.
Current firewall lower bolts are 23.25" apart and the spacing top to bottom are 19.5". And the top mounting bolts are 26.25 apart
I bought a one-off biplane that was setup for a Franklin engine and although I have found one that'll work. I might want to go with a IO-360, the biggest issue is the engine mount of course.
Does anyone have the S2 mount dimensions as it bolts to the firewall? I have made mounts before but if the original builder used a known design it'll definitely save time and money!
I have already checked the dimensions for the Skybolt and Starduster too with no luck.
Current firewall lower bolts are 23.25" apart and the spacing top to bottom are 19.5". And the top mounting bolts are 26.25 apart
Last edited:
