• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



pitts spar doublers

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bipe215

Well-Known Member
*
Joined
May 16, 2007
Messages
284
Reaction score
91
Hello all,


Could someone tell me what the grain orientation should be on the inboard spar doublers on lower S1C wings. The plans show the orientation on the doublers at the wire attach points but I don't see it for the inboards. I'm using 90 degree ply. Thanks in advance.


Steve G
 

Latest posts

Back
Top