• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Poly Fiber

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Stubleduck

Active Member
Joined
Jun 4, 2008
Messages
43
Reaction score
0
I just purchased the Poly Brush and Poly Spray for my Acro1 in quantities listed in the Poly Fiber manual.
I've put the initial Poly Brush coat on the wings and empanage and have only usedone gallon.
I can see another gallon for the initial fuse coat times 3 coats on all would be 6 gallons of the Poly Brush not the 11 gallons I purchased!
And I haven't even started the 10 gallons of Poly Spray!
Has anyone else used this system that can tell me what quantities they used?
Thanks!
 

Latest posts

Back
Top