• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



prop spacer removal

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

patreilly

Well-Known Member
Supporting Member
*
Joined
Mar 28, 2018
Messages
162
Reaction score
41
I have purchased a Sensenich metal prop with a 1 1/2" spacer. How do I remove the spacer. I see there are 2 pins holding them together. I have used a drift pin on the pins individually. I'm afraid to beat on them any harder. I would imagine I need to use a press on both pins at the same time, or possibly press each pin completely out of the assembly individually. I have a 12 ton press, but am wondering how you support the prop and press on it if the spacer remains in assembly with the pins.
 

Latest posts

Back
Top