• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Re-sticking inspection rings

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

72878

Well-Known Member
Supporting Member
Joined
Mar 23, 2020
Messages
77
Reaction score
35
Location
KLWM
I have some inspection cover rings that have delaminated and need to be re-stuck. Covering is Stitts Polyfiber with Aerothane top coat.

Looking for thoughts on best way to fix these. Polytac?, epoxy? Assuming they were originally stuck on with polytac can I just rejuvenate with some solvent and clamp? My first thought was a syringe and polytac and a bunch of binder clips but maybe there is a better way.
 

Attachments

  • IMG_20210611_090004251.jpg
    IMG_20210611_090004251.jpg
    1.6 MB · Views: 0
  • IMG_20210611_090026780.jpg
    IMG_20210611_090026780.jpg
    1.6 MB · Views: 0

Latest posts

Back
Top