Replacing Dynafocal Lord mounts

[EAABipe40FF]

I have a IO320 B1A with the type 2 mount. I found installing engine on mount really nasty. So my question,

Can the "Lord" mounts be changed w/o completely removal of engine like by holding with hoist, loosening and replacing either top and then bottom mounts?

I'm also considering mount swapping top/bottom or in/out as a diagnostic tool before buying new. If that makes an improvement then go ahead and purchase new mounts?

Thanks,

Jack

 

[Dennis Flamini]

 

[PittsDriver68]

 

[S2e]

 

[PittsDriver68]

 

[dimcuesta]

 

[TFF1]

 

[Dave Baxter]

 

[EAABipe40FF]

 

[biplanebob]

 

[EAABipe40FF]

 

[Lotahp1]

 

[Steve H]

 

[EAABipe40FF]

 

[cwilliamrose]

 

[Lotahp1]

 

[Dennis5678]

 

[EAABipe40FF]

 

[PittsDriver68]