New posts

The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.

Click here to register and become a Subscribing Member

Restored and modified quadrants

Thread starter baxterquadrants
Start date Apr 14, 2012

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

baxterquadrants

Member

Apr 14, 2012

With the change this was deleted resubmitting.
I was sent these two old quadrants with the request to add a third control arm if possible.
I added 2" in height to the throttle arm to fit the 3rd arm between the front arm and the throttle.
The front arm has a 1" O.D tube cut in half to off set the control arm to the cable connection arm.
I used 3/4" O.D tubing to fit between the 1" tubing and the throttle tubings 3/8".
New curved upper spacers to give some distance between all the arms
What do you think?

Rock and Joan

Baxter Quadrants Inc.
624 S.W. Langston Rd.
Renton, WA. 98057
(206)-303-7020
[email protected]
http://baxterquadrants.com