• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Ribs drawing

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FrancoBelge

Member
Joined
Jun 30, 2014
Messages
12
Reaction score
5
Hi all,

I have some problems to print the ribs on scale. U.S. A3 is not exactly the same as the French A3
I will draw the airfoil from coordinates, directly on the board, but before I need some clarification.
- Airfoil used is really a NACA 23015 ?
- What is the exact length of the CL of the rib. I have 58-1/4" but I'm not sure
- what is the exact measurement between the red arrows on the drawing below.

FrancoBelge

rw-fig1.jpeg
 

Latest posts

Back
Top