• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Rod End Bearings -

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mjk51

Member
Joined
Sep 2, 2006
Messages
172
Reaction score
53
Location
Fostoria, Ohio
Anyone have an opinion, on substituting the Aurora GMV-4M-595 ($18) rod end bearing for the Heim F-45-19 ($40) in the aileron push tubes. I don't want to be cheap about it and cut the wrong corner. The print calls for 10 of these rod ends. There are differences in the construction of the two, butthese differences do not seem to be extreem. Thanks....Mike
 

Latest posts

Back
Top