• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $29.95/year to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

  • If you have bought, sold or gained information from our Classifieds, please donate to Biplane Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

S-1 Parts Sale Part II

N111KX

Well-Known Member
Joined
Apr 8, 2011
Messages
93
Reaction score
3
I cannot edit my original ad so here's an update on what's left with reduced prices...

1) S-1 Fuselage $4000.00, primed gloss white
-1990's unused factory (to the best of my knowledge) fuselage
-control stick torque tube with blocks and bearings
-Steen rudder, new, powdercoated

2) Wing hardware
-Anti-drag wires plus terminal ends (16 are required but I have 28 of them!) MSRP $872.00, My price $750.00 for all
-two S-1 wing bellcranks and two S-1 idlers with bearings MSRP $476.00, My price $300.00
-eight "C" or "D" model aileron hinge bases with HEIM REPB3N-2 bearings riveted on, MSRP $824.00, my price $400.00
-two S-1 aileron pushrods MSRP $50.00, my price $25.00
-eight S-1 spar plates, powdercoated MSRP $280.00, my price $175.00
-four S-1 landing wire fitting shafts and collars, powdercoated MSRP $156.00, my price $80.00
-four S-1 (a set) upper wing attatch fitting plates, powdercoated MSRP $92.00, my price $60.00
-ten AN490 threaded rod ends for making torque tubes on 5/8 inch 4130, MSRP $170.65 my price $100.00
-Steen Rib Jigs for "C" or "D" wings, make offer

3) Miscellaneous hardware and parts
-quantity (18) HEIM REPB3N-2 bearings, MSRP $1260.00 (@ $70.00 per) my price $800.00
-S-1 fuel tank with flop tube from Steen, MSRP $675.00 my price $400.00
-quantity 8 tail wire mounting tabs, new, MSRP $110.00 my price $60.00
-set of Steen S-1C plans, set of "factory" plans with "D" model addendum, make offer
-random pieces of spruce and ply that I'll make a deal on or throw in!
-trailing edge material, I'll make you deal

4) -Bruton tail wire set (new) with terminals MSRP $1190.00 my price $750.00

All prices will go down until sold so check back.

I'm near downtown Atlanta if you wish to pick things up! Please message me for more contact info or more pics.
 

CAKevin

Registered Users
Lifetime Supporter
Joined
Jan 31, 2012
Messages
860
Reaction score
153
PM sent for fuel tank and flop tube
 

N111KX

Well-Known Member
Joined
Apr 8, 2011
Messages
93
Reaction score
3
Bump with pics to follow. I'd like these out of my house!

1) S-1 Fuselage $4000.00, primed gloss white
-1990's unused apparent factory made (can't find any markings but dimensions are right on and welds look great). The torque tube has factory markings.
-control stick torque tube with blocks and bearings
-Steen rudder, new, powdercoated

2) Wing hardware
-Anti-drag wires plus terminal ends (16 are required but I have 28 of them!) MSRP $872.00, My price $500.00 for all
-four S-1 (a set) upper wing attatch fitting plates, powdercoated MSRP $92.00, my price $50.00



I'm near downtown Atlanta if you wish to pick things up! Please message me for more contact info or more pics.[/QUOTE]

IMG_20170428_152903082_HDR.jpg


IMG_20170428_152935022_HDR.jpg
 
Last edited:

VH-FKS

Well-Known Member
Supporting Member
Joined
Jul 13, 2012
Messages
439
Reaction score
151
Thrown not sure if you need a factory fuse or just looking for a project but another one of the members has a couple of cheap projects that look ok for sale. I think Jim Stanton also has a fuse for sale on barnstormers which would be worth a try.
 

tbrown652

Member
Lifetime Supporter
Joined
Apr 25, 2019
Messages
11
Reaction score
2
Location
Tennessee
I actually own this fuselage, I was just putting a place holder so I could find this post again in the future. I am always on the hunt for projects and parts though, preferably factory stuff, haven’t seen anything for sale from Jim Stanton though.
 

Latest posts

Top