• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



S-1 Parts Sale Part II

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

N111KX

Well-Known Member
Joined
Apr 8, 2011
Messages
93
Reaction score
3
I cannot edit my original ad so here's an update on what's left with reduced prices...

1) S-1 Fuselage $4000.00, primed gloss white
-1990's unused factory (to the best of my knowledge) fuselage
-control stick torque tube with blocks and bearings
-Steen rudder, new, powdercoated

2) Wing hardware
-Anti-drag wires plus terminal ends (16 are required but I have 28 of them!) MSRP $872.00, My price $750.00 for all
-two S-1 wing bellcranks and two S-1 idlers with bearings MSRP $476.00, My price $300.00
-eight "C" or "D" model aileron hinge bases with HEIM REPB3N-2 bearings riveted on, MSRP $824.00, my price $400.00
-two S-1 aileron pushrods MSRP $50.00, my price $25.00
-eight S-1 spar plates, powdercoated MSRP $280.00, my price $175.00
-four S-1 landing wire fitting shafts and collars, powdercoated MSRP $156.00, my price $80.00
-four S-1 (a set) upper wing attatch fitting plates, powdercoated MSRP $92.00, my price $60.00
-ten AN490 threaded rod ends for making torque tubes on 5/8 inch 4130, MSRP $170.65 my price $100.00
-Steen Rib Jigs for "C" or "D" wings, make offer

3) Miscellaneous hardware and parts
-quantity (18) HEIM REPB3N-2 bearings, MSRP $1260.00 (@ $70.00 per) my price $800.00
-S-1 fuel tank with flop tube from Steen, MSRP $675.00 my price $400.00
-quantity 8 tail wire mounting tabs, new, MSRP $110.00 my price $60.00
-set of Steen S-1C plans, set of "factory" plans with "D" model addendum, make offer
-random pieces of spruce and ply that I'll make a deal on or throw in!
-trailing edge material, I'll make you deal

4) -Bruton tail wire set (new) with terminals MSRP $1190.00 my price $750.00

All prices will go down until sold so check back.

I'm near downtown Atlanta if you wish to pick things up! Please message me for more contact info or more pics.
 

Latest posts

Back
Top