This is a panel I made for my S1 that I won't be using. I made another one where the center 2.25 instrument is near the top. My plan was to use my phone in the open area, but I decided to use an Ipad mini instead, so I moved my CHT to the top and fit the Ipad in the new space. The rectangular opening at the bottom center is for a Winter slip/skid indicator. I wanted it mounted from behind rather than on the panel face. The opening will need to be larger to install it from the front. The 2 round cutouts on the right above the 5 small holes are for a dual USB port and a 12V receptacle. The PDF file shows how I was going to arrange this panel. The Ipad outline represents a mini with a case around it. The bottom of the panel has a flange on it. The lower corners have not been trimmed to fit over the top longerons. If someone can use this this panel it's available for just the shipping cost. Another forum member helped me with a part I needed, so I want to pass on the favor.
Cheers
Enzo
Cheers
Enzo
