• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Sensenich wood/composite propeller

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Acrobum

Well-Known Member
*
Joined
Mar 21, 2016
Messages
303
Reaction score
345
Some of you will recall that I have been helping Sensenich as a consultant with developing new aerobatic oriented propellers. Since my last post announcing the release of this new series of propellers, I have been able to help many of you in this group personally get set up through installation. It really has been a lot of fun working with the members here. With that being said, we have worked up a little inventory of these props that have been flown and can’t sell as new.

I have three new and used propellers ready to ship in inventory. All are drilled for O-360 1/2” prop bolts. These propellers tend to run two inches pitch less than the equivalent aluminum Sensenich 76EM8. Example, a WC76NM8-56 will be a close equivalent to a Sensenich 76EM8-58.

-First propeller is a WC76NM8-56 that is grey with white blade tips and urethane leading edge protection. This propeller has been flown, but less than 5 hours. No damage. Asking $1,800 shipped. Perfect for a stock, 180hp bungee gear S-1.

-Second propeller is a WC76NM8-58 that is white with red blade tips and urethane leading edge protection. This propeller has been flown, but less than ten hours. No damage. Asking $1,800 shipped. Perfect for a mild O-360 stock S-1 or spring gear S-1. (Pictured below)

-Third propeller is a WC74NM8-60. This was a custom order that fell through, still new in the box. This is drilled for 1/2” bolts even though it is a 74” diameter prop. It is white with red blade tips and urethane leading edge protection. $1,900 shipped.

F275B9A3-7EDB-4DD0-AEF0-9B81AAE1595F.jpeg

D9BDEA26-7806-4C7E-A1AB-0847BCECB3A5.jpeg
476942A7-A3EE-4D36-9A3C-201B473DF1B1.jpeg
 
Last edited:

Latest posts

Back
Top