• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Sheet Metal Work

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dave.flying

Well-Known Member
Joined
Jan 27, 2007
Messages
215
Reaction score
6
I am trying to find out how one puts the very slight bend on the edge of the sheet of alloy to make look straight when bolted down and not have a wavy effect between the bolts.
Dave
 

Latest posts

Back
Top