• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Simple Clean Way to Oil Hard to Reach Bolts/Bearings

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

4-Shipp

Well-Known Member
Supporting Member
*
Joined
Oct 14, 2013
Messages
391
Reaction score
342
https://cdn.imagearchive.com/biplaneforum/data/attach/71/71869-31p2pR2-prL.jpg
1665497469150.png


I didn’t want to hijack Beej’s excellent paint thread. He showed how he used these pipets to mix small amounts of trim paint.

I use them to oil hinge bolts, rudder pedal tube bearings and anything that is hard to reach or doesn’t need LPS 2 overspray behind the fitting. Use for 20W, your favorite LPS or whatever is needed. Let’s you easily add one or two drops to a fitting. Beats a pump out can or aerosol.
 

Latest posts

Back
Top