New posts

The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.

Click here to register and become a Subscribing Member

Skybolt Instrument Panel Design

Thread starter Nate
Start date Apr 7, 2016

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Nate

Preparation A thru G failed, now it's time for pre

Apr 7, 2016

I was inspired reading another thread about someone making his panel in AutoCad. Luckily at work here there is an art department and I had one of the graphic designer's lay out the Skybolt panel with the exact dimensions. I included a few instruments that I plan on installing like the MGL IXtreme, a 3 1/8" ALT and ASI, 3 1/8 inch UMA 3pack, smoke arm button, 5 breakers, gmeter, sequence card and master/avionics/extra switch. This is made in illustrator so everything is on layers, and you could move everything around. This is just a basic set up but I thought it might help someone.

It is a .pdf file and needs to be opened in Illustrator to have access to the layers and editing capabilities. If you open without Illustrator it will be just like a regular .pdf

http://s000.tinyupload.com/index.php?file_id=52663337978049417085

Last edited: Apr 7, 2016

You must log in or register to reply here.