• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Slick Magneto repair and parts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jan 23, 2022
Messages
23
Reaction score
2
Location
Germany
Hi guys,
my AcroSport II with Lycoming O320E2A is equiped with Slick Magnetos 4370 and 4373. Nowerdays the right Magneto (4370) makes loss of RPM, rough engine run and missfire/crossfire especially at low engine run.
After opening the Magneto I found, that SB1-15A was not done.
That means, the distributor gear has to be changed.
Has anybody experience, how I can manage to get the replacement part (K3008) from Slick/Champion?
Is it better to send the hole magnoto to Slick for change the distributor (K3008), or get the spare parts?
What amount of money do I have to pay for that warranty repair and how long does that take?
I asked that at slick, but I did not get any answerth.
If somebody has experience or ideas, please let me know.

Best regards Mathias
 

Latest posts

Back
Top