• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Spar fittings, lower wings

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

scottly

Well-Known Member
*
Joined
Sep 13, 2006
Messages
1,639
Reaction score
4
It shows three (1/4") holes and one (5/16") hole for front spar and four (1/4") holes for rear spar. I seem to remember reading something in thenews letters about another 5/16" hole but I can't find it.


Are plans correct in hole placement?
 

Latest posts

Back
Top