• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Spar replacement

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

VH-FKS

Well-Known Member
Supporting Member
*
Joined
Jul 13, 2012
Messages
492
Reaction score
182
I have the opportunity to pick up a completed factory kit upper wing for S1S. One of the front spars is cracked due to an incident. Has anyone had any experience with replacing just one spar? I’m not sure what glue was used. Do both splice blocks get replaced as well?
thanks,
Sam
 

Latest posts

Back
Top