• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Stab incidence

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

climbtime69

Member
Joined
Aug 9, 2013
Messages
13
Reaction score
4
I'm at the point of installing my horizontal stab. I have two sets of plans one show the stab should be set level with the longeron and the other show 1/2" LE up from the longeron. My question is the 1/2 inch is the newer plans, so I assume there had been a correction. Does this actually mean 1/2 above the longeron and if so, is it to the centerline or bottom of the tube. Or does it mean 1/2 above level to the longeron. Thanks


Sent from my iPhone using Biplane Forum
 

Latest posts

Back
Top