• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Starduster Leans

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dynamicaerosport

Active Member
Joined
Nov 4, 2020
Messages
36
Reaction score
4
Location
KJVY
Assuming nothing is bent with the original type gear is there typically a standard reason the SD2 will lean a bit? I was wondering if it might be most likely a bungee issue. Where would I find instructions on replacing the bungees? I have ordered the plans/drawings from Spruce but have not received them yet.
Thanks!
Brad
 

Latest posts

Back
Top