• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Starduster Too Engine Swap

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dynamicaerosport

Active Member
Joined
Nov 4, 2020
Messages
36
Reaction score
4
Location
KJVY
I am considering swapping my O-360 for an angle valve IO360. Will it’s extra width interfere with the stock cowling? I have seen some SD2s with long cowl bumps on them. Are those typically for the 540 or does the angle valve 360 require that as well?
Thanks folks,
Brad
 

Latest posts

Back
Top