- Joined
- Nov 14, 2007
- Messages
- 3,389
- Reaction score
- 3,196
One of my good friends is selling his Starduster project, and I am trying to help. I think it it is a most appealing deal, and a great start for those contemplating building one as there is a lot of stuff with this airplane. The engine alone is worth the asking price, as is the airplane with all of the parts and hardware by its self!
The engine is a solid crank O-360 that was overhauled yrs ago with STP and never run it has been setting since and he will include an RSA-5 fuel injection system for it. There are two fixed pitch props one is a Prince, and the other from and old time prop builder that looks like a piece of furniture, both are in excellent condition there is also a light starter and alternator.
Other parts are new set of Cleveland wheels and brakes, 4 into 1 exhaust, inverted oil system, fuel tank, military throttle quadrants, stinger tail wheel, The landing gear is from a Cessna 170 and is a two piece steel unit. There are two props, instruments, some radios, wings, center section, ailerons, and fixtures for making the wing ribs, flying wires, and a bunch of other parts for the engine and some air frame (4130 tubing etc.). Asking $12,000 for all of it. His Name is
Don Rivera
The airplane is located in Spartanburg, SC 29306
Phone: 864-576-4512
E-Mail: [email protected]
Dave
The engine is a solid crank O-360 that was overhauled yrs ago with STP and never run it has been setting since and he will include an RSA-5 fuel injection system for it. There are two fixed pitch props one is a Prince, and the other from and old time prop builder that looks like a piece of furniture, both are in excellent condition there is also a light starter and alternator.
Other parts are new set of Cleveland wheels and brakes, 4 into 1 exhaust, inverted oil system, fuel tank, military throttle quadrants, stinger tail wheel, The landing gear is from a Cessna 170 and is a two piece steel unit. There are two props, instruments, some radios, wings, center section, ailerons, and fixtures for making the wing ribs, flying wires, and a bunch of other parts for the engine and some air frame (4130 tubing etc.). Asking $12,000 for all of it. His Name is
Don Rivera
The airplane is located in Spartanburg, SC 29306
Phone: 864-576-4512
E-Mail: [email protected]
Dave
Last edited:
