• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

Starting with the center section??

littlebiplane

Well-Known Member
*
Joined
Jul 13, 2009
Messages
151
Reaction score
0
Well, this afternoon I built my rib jig for the Acro Sport 2. I started looking at the plans and thought the center section might be a good place to start my project. Does anyone see any problem I might encounter with starting with the center section vs starting with the outboard wing panels?


Just curious, scratchbuilding is a new thing for me so I'm trying to make a good decision right off the bat.


Thanks guys!


Mike
 

Latest posts

Top