• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



STEEL FLYING WIRES

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

footloose

Well-Known Member
Supporting Member
Joined
Mar 10, 2017
Messages
1,885
Reaction score
1,274
Anyone on here have suggestions on a type of coating for steel (non stainless) flying wires . I have a set of wires that were manufactured by MacWhites . I have considered ceramic or powder coating but that requires a heat curing process and I'm not sure that is acceptable . And , I'm looking for a supplier for the pins 5/16'' and 1/4'' Any input is welcome .
 

Latest posts

Back
Top