• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Stratoflex 111 Hose Ends and Christen Inverted Fittings For Sale

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Cameron

Well-Known Member
Supporting Member
*
Joined
Feb 1, 2007
Messages
2,935
Reaction score
1,215
I've got some original hoses from my Eagle kit that I don't need. These are Stratoflex 111 hose and hose ends. They've never been installed on an airplane, but they are 30 plus years old so the hose is worthless. The hose ends could be reused. There are three -3 hoses, a -6 hose with 90 degree fittings on both ends, and a -10 hose. All of these hose ends would be about $380 from aircraft spruce.....those -6 90's are expensive! I'll take $90 shipped anywhere in the continental USA.

ImageUploadedByBiplane Forum1454374316.265185.jpg

I've also got some leftover Christen Inverted sump fittings. I believe that the long one is the pickup for an angle valve sump. The short one is the oil return fitting that also fits in the sump. Both have been previously installed in a sump, but have never had oil run through them. $25 shipped anywhere in the continental USA.

ImageUploadedByBiplane Forum1454374555.434349.jpg

Or, I'll take $100 for everything.
 

Latest posts

Back
Top