• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Tail Feather Rib Welding

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

smizo

Well-Known Member
Lifetime Supporter
Joined
Sep 7, 2009
Messages
7,609
Reaction score
5,759
hey guys, question on welding the tail ribs. guess its not acro specific so anyone please let me know..... when you weld the rib to the leading edge, or trailing edge and the "spar" do you grind the weld down at all so you dont have a bump in the fabric, or do you attempt to weld it from the inside or something? thanks!!
chris
 

Latest posts

Back
Top