• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



TBI for Continental O-100

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

footloose

Well-Known Member
Supporting Member
Joined
Mar 10, 2017
Messages
1,884
Reaction score
1,274
I have almost collected enough pieces and parts to assemble a Dummy O-200 for my Smith . Need suggestions and opinions on the Type and size TBI for an O-200 with higher compression pistons , C-90 or Riddler cam , 4 into 1 exhaust . I'll be looking for a used unit to mount to allow the connections and cowling mods in mock up . I'll probably want a new one later ? Some of you guy's have had experience in this and I have not so my ears and eyes are open . Any input welcome . Thanx
 

Latest posts

Back
Top