• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Throttle Stop

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Youngman1

Well-Known Member
Supporting Member
*
Joined
Jul 6, 2016
Messages
76
Reaction score
44
Hi All

I'm looking for some info on designs for throttle lever set ups specifically throttle stops for my Laser project.

Everything is standard pitts/laser etc style with a bowden cable to a Bendix RSA5.

I've got everything roughly set up but i'm finding that without a throttle stop at the throttle lever end there is a spongey feel as the cable bunches after hitting the throttle stop. See attached picture, any ideas on how to incorporate a stop into this sort of design would be appreciated. (PS, everything is only mocked up :)

Thanks
IMG_20201006_183603.jpg
 

Latest posts

Back
Top