Hi
In the plans below, the wording is..... 5/8" x .065 x 3/4" bearing. I have a bushing of that size in that hole (not yet welded) and the bushing is sufficient for the shaft to twist freely. Just want to confirm that there is no bearing in this location or the other three areas the shaft passes through the HS Ribs. Bushings seem to be correct...just want to make sure.
In the plans below, the wording is..... 5/8" x .065 x 3/4" bearing. I have a bushing of that size in that hole (not yet welded) and the bushing is sufficient for the shaft to twist freely. Just want to confirm that there is no bearing in this location or the other three areas the shaft passes through the HS Ribs. Bushings seem to be correct...just want to make sure.