• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Upper Ailerons

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

scottly

Well-Known Member
*
Joined
Sep 13, 2006
Messages
1,639
Reaction score
4
Just to double check myself....when I am drilling the holes for the aileron hinge brackets, they are not centered on the spar plates because of the placement of the plates relation to the ribs? I hope I am seeing that correctly.




Also, I know there was some discussion on this board about tapering the wing nose ply to meet the wing ribs......is there something similar done to the ailerons?
 

Latest posts

Back
Top