• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Using polybrush

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 24, 2020
Messages
39
Reaction score
31
Location
Gainesville TX
I am in the process of fixing some newly cracking paint on an eaa biplane. Fabric is good, and through topcoat in polyfiber system. I have found info that temps and humidity effect the poly spray and poly tone. With it getting cooler now i am wondering about both the polybrush and the polyfiber rejuvenator. I cannot find anything regarding temps or humidity limits for either product. Temps i am trying to work with are 54ish to upper 60s and trying to keep humidity under 80% for the polyspray and polytone. I feel confident i can use the rejuvenator and poly brush within that window but can it be used in cooler and higher humidity than the poly spray and polytone?
Mark
 

Latest posts

Back
Top