• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

Vertical Fin Bended

Joined
Jan 22, 2022
Messages
5
Reaction score
0
Location
France
Hi guys,
I've bought a Pitts S1S with a short fuselage and 200 hp. The fuselage is coming from an ex S1C with 160 hp.
The tail fin is bend to the left side (the left wire is more tighten). I believe it's to counteract the torque.
Do you have the same on yours ?
Capture d’écran 2022-12-06 à 17.32.06.png
 

Latest posts

Top