• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Welding Rod Question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mpetri55

Well-Known Member
Supporting Member
Joined
Sep 22, 2019
Messages
96
Reaction score
44
Location
McKinney, TX
Can the same rod be used for Tig and Oxy welding? I'm being told by the local welding supply that it can but I'm questioning the results with Oxy. I have some 4130 rod left over from the the last frame that lays down pretty good. I do have ER70 and 80 for the TIG. The main issue I'm having is being able to see when welding with the TIG .
 

Latest posts

Back
Top