• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Welding threaded rod end

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mc06854

Well-Known Member
*
Joined
Oct 30, 2012
Messages
449
Reaction score
589
Location
Portland, tx
Any tips for welding the threaded rod end into the streamline slave strut. Referring to 2 inch weld along the side of the tubing to secure the threaded rod end(See pic). Seems to want to burn up my tubing before I can heat the rod end up enough to melt the material to fuse with a welding rod.
21364512-0EA3-4E33-93BF-D8F9E23876E2.png
 

Latest posts

Back
Top