Is anyone familiar enough with both products to comment on their differences? I was going to start building ribs today but thought I should check which clear coat will work best with my West Systems epoxy. Read through a bunch of threads but no mention of West 207 Clear Coat.
Could also use the Stewart Systems clear if someone could vouch for how it goes on over West epoxy.
Looking for low viscosity so it lays out nicely, little to no scuffing or other prep, applies thin so it won't add a ton of weight, etc.
West Systems
https://www.westsystem.com/207-special-clear-hardener/
System III
https://www.systemthree.com/products/clear-coat-low-viscosity-epoxy-sealer
Thanks!
Bart
Could also use the Stewart Systems clear if someone could vouch for how it goes on over West epoxy.
Looking for low viscosity so it lays out nicely, little to no scuffing or other prep, applies thin so it won't add a ton of weight, etc.
West Systems
https://www.westsystem.com/207-special-clear-hardener/
System III
https://www.systemthree.com/products/clear-coat-low-viscosity-epoxy-sealer
Thanks!
Bart
