• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Which Nose Bowl

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Beej

Creator of this place
Staff member
Administrator
Moderator
Joined
Jan 1, 2006
Messages
6,655
Reaction score
1,887
Location
Austin, TX
I am getting closer to that stage in the build where I need to be attaching the nose bowl so I can create the sheet metal visual lines. I have a comanche type nose bowl which I will consider swapping out if need be:
https://secure.steenaero.com/Store/site/product.cfm?id=EBEA71A8-102E-BB20-1D9F782B5FE9E4E7
Is the firebolt bowl a better design? I 'think' I read somewhere that the firebolt bowl is a tight fit with the IO-360 angle valves...?
https://secure.steenaero.com/Store/site/product.cfm?id=EBEBFC0D-102E-BB20-1D846BF620132079

Would the Pitts bowl fit?
https://secure.steenaero.com/Store/site/product.cfm?id=6FBB1E90-102E-BB20-1DB92B6E3830582E
 

Latest posts

Back
Top