Hi,
I'm studying the plans before I start cutting up my spars. This does not make any sense to me. Both the upper and lower wing front spars are 4 1/16" tall at the trailing edge side but they are both different widths with the center line being the same for both. Because of the 9 degree angle for the top and the 3 degree angle on the bottom the upper 1" spar should be slightly taller than the 3/4" lower spar. Am I right about this? The spars I have are exactly 4 1/16".
David
I'm studying the plans before I start cutting up my spars. This does not make any sense to me. Both the upper and lower wing front spars are 4 1/16" tall at the trailing edge side but they are both different widths with the center line being the same for both. Because of the 9 degree angle for the top and the 3 degree angle on the bottom the upper 1" spar should be slightly taller than the 3/4" lower spar. Am I right about this? The spars I have are exactly 4 1/16".
David
