• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Wires vs. Struts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

user 38

Well-Known Member
Joined
Aug 29, 2006
Messages
761
Reaction score
74
I am rigging the tail feathers presently and I am pondering using a strut (0.50 x .035 Round) instead of the wires on the lower/forward Horizontal Stab to fuse. I see where others have done this as well. I see variants of the streamline vs. the round tubing at that location. I see some ends of the strut are "crimped" atattach pointversus a weldable rod end fitting at the opposing end.
Any thoughts on strut vs. wires at that location?


D
 

Latest posts

Back
Top