• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Wood L/E for Hatz CB-1

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sarpysam

Well-Known Member
*
Joined
Aug 18, 2013
Messages
59
Reaction score
6
I see that Aircraft Spruce offers a wood leading edge for Pitts, Eagle, etc. and wonder if that might replace the three piece scenario on the Hatz leading edges. Anyone got any ideas?

I'm rebuilding a CB-1 that was ground looped. Wings are all trash but the fuselage survived virtually intact. Anybody know where a left gear might be? Surely, someone ground looped one to the left.

Thanks,

Sarpy Sam
 

Latest posts

Back
Top