• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Working on exhaust tunnel

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

airbiker

Well-Known Member
Joined
Jun 22, 2008
Messages
120
Reaction score
1
I picked up some poster board today and got started laying out the new exhaust tunnel. I got far enough to see where things may get tricky.

I've gone through all the pictures and discussions I could find on the forum and I think I've got a plan I can pull off that will seal up pretty well and look decent. I may try to bend up some aluminum Sunday and see where the plan will collide with reality.

I also took a grinder with a cutoff wheel to the rest of the gear attach fittings, the old battery mount and the front former on the bottom. This had to be finished up to move ahead with the tunnel and new battery box.

There are some pictures here.

Thanks,
Ian


 

Latest posts

Back
Top