• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Zipster engine choices

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flying2bill

Active Member
Joined
Jun 6, 2009
Messages
32
Reaction score
0

As per a previous discussion on Zipster engine choices and it being determined that there where only 2 does anyone have any experiance with this engine from Sinominis. It seems to be popular with the flying kite guys.

<div id="overview" style="PADDING-RIGHT: 15px; PADDING-LEFT: 15px; : left; PADDING-BOTTOM: 15px; WIDTH: 260px; PADDING-TOP: 15px">
<h1>Mini 2S</h1>
The new Mini 2 S is the competition version of the famous Mini 2 Plus. We just developed this unique engine to increase the thrust even further with a slightly better fuel efficiency. We recommend this engine for the most demanding and experienced pilot.
20090707_193328_mini_2_plus_big.jpg


















</t><table cellspacing="0" cellpadding="0" width="400">


<div align="left">Displacement (cm³)


<div align="right">202


<div align="left">Bore (mm)


<div align="right">66.4


<div align="left">Stroke (mm)


<div align="right">58

<td colspan="2">Compression Ratio

<div align="right">10.5/1

<td rowspan="3">
<div align="left">Power

<div align="center">Hp

<div align="right">30


<div align="center">kW

<div align="right">19


<div align="center">RPM

<div align="right">7,400

<td style="PADDING-RIGHT: 5px" colspan="2">Weight of the engine with:
exhaust, air filter, propeller

<div align="right">13 Kg /29 Lbs

<td colspan="2">Reductions Available:
<td valign="bottom" align="right">1:2.26, 1:2.3, 1:2.34, 1:2.42, 1:3</t>
&lt;edited: image removed - no hotlinking, see forum rules. I went to the trouble of downloading the image and uploading it to the forum for you on this occasion
 

Latest posts

Back
Top