• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

MT Prop Grease

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 12, 2019
Messages
8
Reaction score
1
Location
Rochester
I have an MT prop on a S2B. We haven't had the plane very long (New to us plane.) however we have noticed it's slinging some grease. The prop was Overhauled in 2017 and has about 120 hours on it. I'm seeing in the service manual; it shouldn't sling grease at all after 20 hours. What's been everyone's experience with the MT Props? I've heard of complaints about slinging grease, but it seems a bit ridiculous to think that after only120 hours we're needing it overhauled again. Thanks in advance everyone!!

1684530729501.png
 

Latest posts

Back
Top